EN5-2 EF-2 Two-valve Manifold
manufacturer: Kaiweixi Valve Group Co., Ltd
Eml: Merry@kaiweixi.com
Tel: +86 (577) 67038872
Mob: +86 18157711652（WeChat Same Account）
product drawing
EN5-2 EF-2 two-valve manifold
Features and application
EN5-2 EF-2 two-valve manifold integrates cut-off, adjusting and exhaust settings, with compact structure and reduces easy leaking point. EN5-2 EF-2 two-valve manifold has two internal thread interfaces, can be applied to installation of pressure gage, pressure transducer or pressure switch. Its interfaces thread can adopt Rc, G and other thread according to customers’ requirements. If the welding joint is needed, please mark it out when ordering.
Dimensions & constructral diagram
EN5-2 EF-2 two-valve manifold constructral diagram(pic1)
EN5-2 EF-2 two-valve manifold constructral diagram(pic2)
EN5-2 EF-2 two-valve manifold constructral diagram(pic3)
Technical parameters and materials
| No. | nominal pressure PN | inlet | outlet | Applicable Temperature (℃) | Body material |
| 1 | 20MPa | NPT1/2 （inner） | NPT1/2 （inner） | -20～240℃ | 20 |
| 2 | -70～240℃ | 1Cr18Ni9Ti | |||
| 3 | 40MPa | -20～240℃ | 20 | ||
| 4 | -70～240℃ | 1Cr18Ni9Ti |
