EN5-3 WF1/2 Five-valve Manifold
manufacturer: Kaiweixi Valve Group Co., Ltd
Eml: Merry@kaiweixi.com
Tel: +86 (577) 67038872
Mob: +86 18157711652（WeChat Same Account）
product drawing
EN5-3 WF1/2 five-valve manifold
Features and application
EN5-3 WF1/2 five-valve manifold is used in various meter devices introduced from abroad, It can be installed with transmitters of various different pressure, flow and float level, etc. It integrates the high and low pressure valves, the balance valve, and two inspecting (drainage) valves. When the valve is operated, it closes the balance valve and two inspecting valves, and if need to inspect, we just need to cut off the high and low pressure valves, open the balance valve and two inspecting valvs, then close the balance valve, to achieve the online inspection or balance of the transmitter.
Dimensions & constructral diagram
EN5-3 WF1/2 five-valve manifold constructral diagram(pic1)
EN5-3 WF1/2 five-valve manifold constructral diagram(pic2)
EN5-3 WF1/2 five-valve manifold constructral diagram(pic3)
Technical parameters and materials
| No. | nominal pressure PN | nominal diameter DN(mm) | Applicable Temperature (℃) | Body material |
| WFZ-1 | 32MPa | DN5 | -20～440 | 20# |
| WFZ-2 | 25MPa | -70～240 | 1Cr18Ni9Ti |
